Surgi Plast is a medical device manufacturer based in Gadoon Amazai, Swabi, Pakistan, associated with disposable injection and infusion supplies. Its website lists syringes, auto-disable syringes, scalp vein sets, and IV sets. In simple terms, these are medical consumables used within healthcare delivery, rather than medicines themselves. The name identifies a business; understanding a particular item requires checking its product description and packaging.
When I researched the name, I found that a useful explanation needed more than a company introduction. Similar business names appear online, and product listings do not always answer the questions a patient or purchasing team actually has.
Here, I explain the Pakistani manufacturer, what its listed products mean, and how to assess the information accompanying them. I also cover relevant batch-specific safety notices, because those details deserve a place beside any product overview.
What Does Surgi Plast Make?
The company’s public catalogue focuses on injection and infusion supplies. Examples displayed include 1 mL, 10 mL, and 20 mL syringes with Luer lock descriptions, alongside 3 mL and 5 mL auto-disable syringes. These listings describe a range of devices, not one interchangeable product.
I would use this catalogue to identify products worth asking about, then request current specifications. A website listing alone does not establish stock availability, suitability for a procedure, or the status of a particular batch.
Disposable Syringes
A syringe has a barrel and plunger that allow a healthcare professional to draw in or deliver fluid. Depending on its design and intended use, it may connect to a needle or another compatible medical device.
The CDC describes syringes as instruments for injecting or withdrawing fluids and states that healthcare providers should use them once and discard them. Changing the needle does not make a used syringe safe for another patient.
For someone comparing products, the useful questions concern capacity, connector type, supplied needle, and intended application. A familiar brand name cannot answer those questions by itself.
Auto-Disable Syringes
Auto-disable syringes incorporate a feature designed to prevent reuse. Surgi Plast’s 5 mL product page describes a single-use syringe supplied with a needle and sterilized using ethylene oxide gas. Those are manufacturer-listed specifications, rather than independent findings about every unit sold.
WHO recommends auto-disable injection devices for immunization activities. However, that recommendation does not establish that every product carrying an auto-disable label is suitable for every vaccination task. The exact device and relevant programme requirements still matter.
Infusion Supplies
The manufacturer also has a disposable infusion set listing. Its public page identifies the product but provides limited technical detail in the accessible description.
I would ask for the instructions for use and specification sheet before comparing it with another set. Questions about connectors, intended fluids, flow characteristics, and equipment compatibility should receive product-specific answers from the supplier and clinical team.
Surgi Plast and Similarly Named Companies
The spelling can create confusion. Neulife Surgi Plast is a separate business in Ahmedabad, India, whose website describes respiratory products such as oxygen therapy equipment, nebulizer products, breathing systems, and resuscitator bags.
This distinction matters when searching for a catalogue or requesting a quotation. A respiratory-product page from the Indian company does not establish what the Pakistani manufacturer supplies.
My first check would be the full company name and address on the actual package. I would then match those details against the quotation and supplier documentation. Similar spelling is useful for finding possibilities, but it is a weak basis for confirming identity.
The same caution applies to reviews. Feedback about another business with a similar name tells you very little about the product in front of you.
Understanding Syringe Labels Without the Confusion
Product descriptions often combine several features in one line. Separating them makes the comparison easier.
Capacity and Needle Specifications Answer Different Questions
A capacity such as 3 mL or 5 mL refers to the syringe’s volume. It does not, by itself, specify the needle supplied or the clinical situation in which the device should be used.
For example, Surgi Plast’s 5 mL listing separately states a needle specification of 23/24G × 1 inch. This illustrates why copying only the volume into a purchase request can leave the order incomplete. Confirm the exact supplied configuration before ordering.
I would avoid choosing an injection device from size alone. The clinician responsible for the treatment should confirm the appropriate equipment.
Luer Lock and Luer Slip: Describe Connections
A Luer lock connection secures compatible components through a locking arrangement. A Luer slip connection uses a friction fit. BD’s product information distinguishes these connector types and describes Luer lock as useful when a secure connection is required.
Neither term tells you whether a syringe has a reuse-prevention mechanism. Connector design and reuse protection are separate characteristics.
Auto-Disable and Sharps Protection Are Different Features
Reuse prevention concerns whether a syringe can be used again. Sharps protection concerns reducing injuries from exposed needles. A device may have one feature or a combination, depending on its design. WHO guidance treats these as distinct safety considerations.
I would never assume that an auto-disable label means the needle automatically retracts or becomes covered. That feature needs its own confirmation.
| Label or feature | What it describes | What it does not establish |
|---|---|---|
| 3 mL or 5 mL | Syringe capacity | Suitable needle or prescribed dose |
| Luer lock | A locking connector arrangement | Automatic prevention of reuse |
| Luer slip | A friction-fit connection | Suitability for every application |
| Auto-disable | A mechanism intended to prevent reuse | Automatic needle shielding |
| Sharps protection | A feature intended to reduce needle injury | Every other safety characteristic |
The practical lesson is to compare each specification separately. Two syringes can share the same capacity while differing in ways that matter to the person using them.
Surgi Plast Safety Notices Buyers Should Know About
A responsible overview should include relevant regulatory information, with enough detail to avoid broad assumptions.
DRAP published a recall alert dated June 8, 2026, identifying Clinic Auto Disable Syringe 3 mL, registration reference MDMR-000115, batch 3-01B-26, from Surgi Plast. The notice identifies a failure of the self-destructive performance or auto-disable test concerning reuse prevention.
A separate DRAP alert dated May 22, 2026, lists Clinic Auto Disable Syringe 3 mL/cc batches 3-01C-26 and 3-01B-26 as substandard.
These are specific product-and-batch findings. They should not be rewritten as evidence that every Surgi Plast product has the same defect. Equally, an unaffected batch number is not a substitute for checking current regulatory information and product condition.
If stock matches an alert, stop using or distributing the affected items, keep them separate, and contact the supplier or responsible pharmacist about the recall instructions. Check DRAP for subsequent updates before making a current purchasing decision.
I find batch numbers more useful here than general statements about reputation. They connect a public notice to identifiable stock.
What Sterilization Information Can Tell You
The abbreviation “E.O.” in the manufacturer’s syringe description refers to ethylene oxide. The FDA explains that this gas is used to sterilize medical devices and that packaging must allow the sterilization process to work as designed.
That explains a manufacturing term; it does not tell a patient to sterilize the device at home. Follow the single-use label and the instructions accompanying the exact product.
Surgi Plast’s catalogue also warns that sterility is not guaranteed when infusion-set packaging is punctured. A visible package defect therefore deserves attention even if the item has never been used.
My approach would be to treat the label, protective packaging, and instructions as a connected set of information. A product photo or an assurance that the device “looks clean” cannot replace them.
How I Would Compare Suppliers Before Ordering
For a purchasing team, the useful question is: “Can this supplier document the exact product being offered and support it after delivery?”
I would send the same request to each supplier. That keeps the comparison fair and reduces the chance of accepting a cheaper quotation for a different configuration.
| Comparison point | Less useful response | More useful evidence to request |
|---|---|---|
| Product identity | “Standard syringe” | Exact name, model, capacity, and connector |
| Supplied needle | “Needle included” | Written needle specification |
| Traceability | A brand photograph | Legible batch details and invoice records |
| Shelf life | “Fresh stock” | Expiry dates for the offered stock |
| Regulatory information | “Approved quality” | Relevant documents identifying the product |
| After-sales support | “Contact us if needed” | Named contact and recall or return process |
This is a proposed purchasing checklist, not a claim that I have audited any supplier. Its value is making vague assurances easier to replace with information that can be reviewed.
Ask for Evidence That Matches the Item
If a supplier sends a certificate, I would check the company name, manufacturing location, scope, and validity details. I would also ask which products it covers.
I would not turn an old directory entry or an undated certificate image into a statement about current compliance. Where the documentation is unclear, the next action is clarification from the issuer or relevant authority.
Compare the Complete Quotation
A useful quotation should identify pack quantity, price basis, delivery charges, lead time, and the exact configuration. Otherwise, the lowest visible number may simply represent a smaller pack or a different item.
I have not established a reliable current public price list for Surgi Plast. Requesting a dated quotation is more useful than publishing a price that readers cannot reproduce.
A Practical Way to Make Batch Checks Easier
One improvement I would suggest for a small clinic is a simple receiving record that connects each delivery to its batch details.
Record the supplier, invoice number, product description, quantity, batch number, expiry date, and storage location. If a delivery contains several batches, give each batch its own entry rather than combining everything into one line.
Then consider this hypothetical situation: a clinic receives two cartons of the same syringe, but each carton carries a different batch number. A later notice names only one batch. An inventory entry saying “two cartons received” cannot show which stock needs to be located.
A batch-level record can make that search much more direct. The team can identify the relevant carton and follow its established recall procedure without relying on memory.
For me, this is the most useful connection between a company profile and everyday purchasing. Product information becomes actionable when it can be matched to actual stock.
What Patients Can Ask Before an Injection
Patients do not need to understand a supplier’s entire catalogue to ask reasonable questions. If you are uncertain, ask whether the syringe and needle are new and whether the package is intact.
The CDC warns that unsafe reuse can transmit infections, including hepatitis B and hepatitis C. A new needle does not remove the risks associated with reusing a syringe between patients.
If your concern involves a named product recall, ask the clinic or pharmacist to check the precise product and batch. A matching manufacturer name alone does not establish that the device used was affected.
I would also leave equipment selection and injection technique to the qualified professional responsible for treatment. A product overview can help you ask better questions, but it cannot determine your prescribed dose or appropriate administration method.
Safe Disposal Belongs in the Purchase Plan
Used needles and syringes need a disposal route. The FDA recommends placing used sharps promptly into appropriate sharps containers and following local disposal arrangements. Its guidance also explains that containers should resist punctures and leakage.
For a healthcare facility, I would include suitable containers and collection arrangements in the supply discussion. Ordering injection equipment without considering what happens after use leaves part of the process unresolved.
An auto-disable feature does not remove the need to handle and discard the used device safely. The needle may still present an injury risk, depending on the design.
Making an Informed Decision About Surgi Plast
Surgi Plast is best understood through its individual products, supporting documentation, and identifiable batches. I would start with the clinical requirement, confirm the exact specifications, and check current safety notices before ordering.
Your next step is to obtain the current product sheet and a dated quotation from a verified supplier. If you already hold stock, compare its batch details with relevant DRAP alerts and ask your pharmacist or procurement lead to resolve any uncertainty.
Frequently Asked Questions
What is Surgi Plast?
Surgi Plast is a Pakistani medical-device manufacturer associated with disposable injection and infusion supplies, including syringes and IV sets.
Where is Surgi Plast located?
Its website lists an address at Plot 78, Road L4, Industrial Estate Gadoon Amazai, Swabi, Khyber Pakhtunkhwa, Pakistan.
Does Surgi Plast make auto-disable syringes?
Its catalogue lists 3 mL and 5 mL auto-disable syringes. Confirm the current specifications and batch information before purchase.
Can Surgi Plast disposable syringes be reused?
Single-use syringes should be discarded after use. Changing the needle does not make a used syringe safe for another patient.
How can I check whether a Surgi Plast syringe is recalled?
Match the product name, size, and batch number against current DRAP notices, then contact your supplier or pharmacist if the details match.
Claire Morgan is a health and wellness writer with 7 years of experience creating clear, research-informed content on nutrition, sleep, movement, preventive habits, and everyday wellbeing. She focuses on making reliable health information practical and easy to understand. Her articles are educational and do not replace professional medical advice.
